Facebook

5 Mar 2019

10mm Scale Ancient Great Wall of China

10mm Scale Ancient Great Wall of China is suitable for 10mm figures, it was originally made on request of an eBayer. Design and built for their specific requirements such as a larger wall depth to accommodate the figures on top. Hence it is deeper than true scale. All aspects of the model can be modified on request with varying difficulty and time.

This is an example of my offer to try and design and make any building requested based on provided images.

10mm Scale Ancient Great Wall of China

10mm Scale Ancient Great Wall of China picture 1

10mm Scale Ancient Great Wall of China picture 2

10mm Scale Ancient Great Wall of China picture 3

10mm Scale Ancient Great Wall of China picture 4

10mm Scale Ancient Great Wall of China picture 5

10mm Scale Ancient Great Wall of China picture 6

10mm Scale Ancient Great Wall of China picture 7

10mm Scale Ancient Great Wall of China picture 8

10mm Scale Ancient Great Wall of China picture 9

10mm Scale Ancient Great Wall of China picture 10

10mm Scale Ancient Great Wall of China picture 11

10mm Scale Ancient Great Wall of China picture 12

14 Wall sections: each section is 100mm long, 75mm deep at the bottom 61mm deep between the walls. Walking platform is 40mm above the base. One wall is 13.5mm above the walking platform. The smaller wall is 6mm above the walking platform.

4 Towers with removable top buildings: 80mm long, 90mm deep excluding rear entrance doorway, on the platform 75mm deep between the walls, 70mm wide between the walls. All walls are 13mm tall, cut outs are 6.4mm tall. (4 top buildings are 50mm x 30mm x 30mm)

1 Gate Tower with door: 126mm long, 90mm deep, on the platform 75mm deep between the walls, 115mm wide between the walls. All walls are 13mm tall, cut outs are 6.4mm tall. (Gate is 37.5mm tall in the middle, 40mm wide at the base, to add of remove the gate you just need to lift up the tower and slot it in or out).

Painted: No

Assembled: No and not required.

Overall dimensions(mm)

Width: 1850

Depth: 100

Height: 95

(Doors are 13.2mm high)

Important Notes:

The base unpainted models are made from a recyclable white plastic.

To paint typically I use a combination of primer, model paste depending on the finish you want, base coat of chosen colour, then add details with standard modelling paint.

I design and make my own scenery. I am open to any new suggestions or requests. Just send me a message. I can modify almost any aspect, add, remove and change the scale between 6mm to 28mm.

wmanns11

2 comments: