Facebook

Wednesday, 15 December 2010

Tigers in Combat, Vol. 1

Tigers in Combat, Vol. 1

Scores of unique photos of Tiger tanks Intricate and richly colored drawings, with special focus on markings and insignia Accompanying text lists units' combat strengths, equipment, commanders, and engagements By the end of World War II, the dreaded Tiger tank had achieved mythical, almost mystical status. In this much-sought-after volume on the Wehrmacht's numbered Tiger units, Wolfgang Schneider tells in pictures the story of these renowned tanks. Hundreds of photos depict Tigers in all situations and terrain, and a section of painstakingly detailed drawings brings the tanks to life in the metallic grays, snow whites, desert tans, and forest greens and browns that colored them. Modelers and buffs alike will delight in this impressive collection.

Tigers in Combat, Vol. 2
Tigers in Combat, Vol. 3

Friday, 3 December 2010

Making Buildings

Making Buildings

Making buildings is an easy guide to follow. In this section of the site you will find all the buildings I have scratch built. The first building I constructed was the American Civil War (ACW) blockhouse which was because of my very good friend Malcolm who is also a member of the Grimsby Wargames Society, had made one for his 15mm ACW and looked so good I thought I would attempt to do my own for my 10mm ACW.

Incidentally Malcolm and Andy make all of the scenery for the Grimsby Wargames Society I can only say I wish I had half their skills anyway don't take my word for it check out the website galleries and you'll see for yourself the outstanding work they managed to achieve.

The next buildings I constructed were the Stalingrad factory ruins which I needed for my World War II (WWII) project Russian front on the whole I am rather pleased with how they turned out I should imagine overtime my scratch building skills will improve anyway hope you enjoy and please leave comments.
  1. Making American Civil War (ACW) Blockhouse
  2. Making Gallic/Celtic Hillforts
  3. Making Gallic/Celtic Villages
  4. Making Rorkes Drift Base
  5. Making Stalingrad Ruined Factory One
  6. Making Stalingrad Ruined Factory Two
  7. Making Stalingrad Ruined Factory Three
  8. Making Stalingrad Ruined Factory Four
  9. Making Zulu Kraals and Villages

Wednesday, 1 December 2010

Making Hedges

Making Hedges

This tutorial will walk you through the process of making hedges for your 10mm wargaming table out of common scouring pads which can be bought from your local supermarket.

1. The first step is to cut your bases to the desired size either using MDF or hardboard in my case I used hardboard and cut it to 1 inch wide by 6 inch long once you have cut your bases to the desired size you then want to proceed to rasp the edges to give it a smoother appearance.

Making Hedges Picture 1

2. Cut the scouring pads to the desired height and length. 

Making Hedges Picture 2

3. The next step is to texture your base. I have done tutorial on basing

4. The next step is to immerse the cut scouring pads into a tub of PVA and then immerse the saturated scouring pads into a tub of mixed Javis Countryside Scenic Products Scatter No 21 pasture green and Javis Countryside Scenic Products Scatter No 15 mid green allowed to dry.

Making Hedges Picture 3

Making Hedges Picture 4

Making Hedges Picture 5

5. You can miss the above stage if you prefer to paint instead use a dark green followed by lighter shades of green and highlight with yellow.

6. The next and final stage is the glue the scouring pads on to your precut and textured bases using a glue gun.

Making Hedges Picture 6

Making Hedges Picture 7

Making Hedges Picture 8

Making Hedges Picture 9

Making Hedges Picture 10

Making Hedges Picture 11

Tools

Pencil
Tape measure
Wood saw
Rasp
Paintbrushes
Craft knife
Scissors 
Ruler 
Glue gun

Materials

Hardboard
Polycell Textured Ceilings Course Effect
Ronseal Diamond Hard Varnish, matt clear
Noch Summer Meadow Grass
Scouring pads
PVA
Javis Countryside Scenic Products Scatter No 21 pasture green
Javis Countryside Scenic Products Scatter No 15 mid green

Humbrol Colours

Humbrol No. 110 Natural Wood
Humbrol No. 103 Cream

Wednesday, 27 October 2010

Making Cornfields

Making Cornfields

Making cornfields is an easy guide to follow on how to make cornfields for 10mm wargaming terrain has been a long time in the planning. However when I finally started the project making cornfields proved very easy indeed. Anyway here's my guide for making your own fields for 10mm wargaming. 

1. The first step is to cut your bases to the desired size either using MDF or hardboard in my case I used hardboard and cut it to 6 inch by 6 inch once you have cut your bases to the desired size you then want to proceed to rasp the edges to give it a smoother appearance.

Making Cornfields Picture 1

2. The next phase is to mark out where you want to place the carpet, or doormat.

Making Cornfields Picture 2

Making Cornfields Picture 3

Making Cornfields Picture 4

Making Cornfields Picture 5

3. The next step is to texture your base. I have done tutorial on basing.

Making Cornfields Picture 6

4. The next step is to cut your carpet or doormat to the desired shape then glue it is to cut your carpet or doormat to the desired shape then glue it to the base using PVA.

5. The next step is to lightly dry brush with yellow until you get the desired effect.

Making Cornfields Picture 7

Making Cornfields Picture 8

Tools

Pencil
Tape measure
Wood saw
Rasp
Paintbrushes
Scissors

Materials

Hardboard
Polycell Textured Ceilings Course Effect
Ronseal Diamond Hard Varnish, matt clear
Noch Summer Meadow Grass
PVA
Carpet
Doormat

Humbrol Colours

Humbrol No. 110 Natural Wood
Humbrol No. 103 Cream
Humbrol No. 24 Trainer Yellow

Thursday, 21 October 2010

Making Trees and Woods

Making Trees and Woods

Making trees and woods an easy guide to follow. Probably one of the most important features of any wargames table is trees and woods not only do they improve the look of your table but they also have an important effect on the game too. Trees block line of sight and hamper movement, and can also provide cover for units to ambush from. A couple of strategically placed trees or a clump of woods will provide plenty of interesting tactical challenges. 

Making Trees
Below there are several tutorials to help you build individual trees which can be combined to make a large wood.

Making Wire Trees
When making trees from wire, you start by constructing the trunk and branches. You will be able to then either leave them then as old dead trees or finish them off with a wide variety of different foliage effects.

1. Start out by cutting your bundle of wire to size. You'll want the length of wire to be double that of the finished tree. Commence shaping the tree by bending the length of wire in half and making a loop at the folded end. Use the loop to twist the wires together to form the tree trunk. When you have finished, cut the loop and form the branches at one end and the roots at the other. 

2. Bend the trunk into the shape you desire. Shape the branches so that they curve upwards ready to apply the clump foliage. Put on a coat of Polyfilla to the trunk of the tree. 

3. Once the Polyfilla is dry undercoat the finished tree with Humbrol No. 67 Tank Grey. Then start to paint the trunk and branches with Humbrol No. 110 Natural Wood before adding the clump foliage.

Mangrove Swamp Tree
Mangroves are assorted kinds of trees up to medium height and shrubs that grow in saline coastal sediment habitats in the tropics and subtropics.

1. Begin making your Mangrove tree in the same way as you would for a standard wire tree.

2. When you have your twisted wire strand you need to make a tree shape. For the Mangrove tree, you need to allow for much larger roots which make the tree stand above the ground. The branches, whilst similar to those of the standard wire tree, need to droop downwards. 

3. Polyfilla the trunk and then texture it, then undercoat the Mangrove tree with Humbrol No. 67 and finally paint with Humbrol No. 110. This tree doesn't have a canopy of leaves like a most trees. Glue your clump foliage to ends of the individual branches, following its natural curve using PVA glue.

Mangrove Swamp Tree picture 1

Mangrove Swamp Tree picture 2

Mangrove Swamp Tree picture 3

Mangrove Swamp Tree picture 4

Making Trees From Christmas Trees
Christmas decorations can be surprising useful for the wargamer Christmas trees can be cut up to make dense woods with a little bit of work, however there is a multitude of decorations which can be adapted for wargaming purposes.


Making Trees From Nails
1. First of all select the desired size of nails.

2. After selecting the desired nails I then cut small irregular shapes of hardboard to mount the nails on.

3. You can either tap them through the hardboard or glue them on using a glue gun.

3. The next step is to paint their nails I use Humbrol No. 110 Natural Wood.

4. The next stage is to add clump foliage which is made by Woodland Scenics Which Is torn into assorted chunks, next the largest clump is slid down the nail and glued into place using a glue gun carry on the process by using smaller clumps each time.

Making Trees From Plastic Aquarium Plants
There are many different sorts of plastic aquarium plants which can be utilised for wargaming to simulate dense jungle or just to add a bit of variety to the trees you already possess they can be bought relatively cheaply and of course can be based anywhere you desire.

Plastic Aquarium Plants picture 1

Plastic Aquarium Plants picture 2

Plastic Aquarium Plants picture 3

Plastic Aquarium Plants picture 4

Woodland Scenics Tree Armatures And Foliages
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout, Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage and Poly Fiber.

Woodland Scenics Tree Armatures picture 1

Woodland Scenics Tree Armatures picture 2

Woodland Scenics Tree Armatures picture 3

Woodland Scenics Tree Armatures picture 4

Woodland Scenics Tree Armatures picture 5

Woods Made From Cheap Trees From China
The trees you see below were all bought from eBay at a relatively cheap price see here (Auction) the only thing I would say regarding these trees is the foliage is sometimes loose however I use hairspray to fix them.

1. You can base these trees individually see basing tutorial

2. Alternatively you can clump them together to make convincing woods.

3. As you can see from the pictures I started off with an already textured base all that's required is to drill small holes and then using the glue gun dab small amounts of glue into the hole and then insert the tree.

Making Woods Picture 1

Making Woods Picture 2

Making Woods Picture 3

Making Woods Picture 4

Making Woods Picture 5

Making Woods Picture 6

Making Woods Picture 7

Making Woods Picture 8

Making Woods Picture 9

Making Woods Picture 10

Making Woods Picture 11

Making Woods Picture 12

Making Woods Picture 13

Making Woods Picture 14

Making Woods Picture 15


Tools

Pencil
Tape measure
Wood saw
Rasp
Glue gun
Cutters
Drill
Paintbrushes

Materials

Hardboard
Polycell Textured Ceilings Course Effect
Polycell Polyfilla
Ronseal Diamond Hard Varnish, matt clear
Noch Summer Meadow Grass
Galvanised wire (small grade)
PVA Glue
Hairspray
Christmas tree
Nails
Clump Foliage Woodland Scenics
Woodland Scenics Tree Armatures And Foliages

Humbrol Colours

Humbrol No. 110 Natural Wood
Humbrol No. 103 Cream